|
Post by athikerguy4life on Dec 18, 2012 10:21:48 GMT -5
Test fit of my new 300zx calipers. They will need to be trimmed down a bit to clear the rotors (same problem the spec v and 240 guys have) but they will bolt up just fine. The other option is getting some new rotors that are a 270 or 275 mm rotor. The stock versas are 280 and they are just barely too big.
|
|
|
Post by austiida on Apr 29, 2013 5:26:11 GMT -5
Did you get this all working and installed champ? Saw your post on this at NVF but haven't seen any update
|
|
|
Post by athikerguy on Apr 29, 2013 5:53:18 GMT -5
Someone else got a set installed but I've been so busy (just moved, new job, etc) I haven't had much time to work on mine. I started working on one caliper but I haven't finished it and I haven't even started the other one.
|
|
|
Post by austiida on Apr 29, 2013 5:54:34 GMT -5
Ah cool, thanks for the update
|
|