|
Post by athikerguy4life on Jan 20, 2013 12:28:57 GMT -5
Fixed my passenger seat!! There was a little crimp connector stuck in the seat track. didn't even have to pull the whole thing out.
|
|
|
Post by Hemifan87 on Jan 20, 2013 20:51:43 GMT -5
finally tucked up the muffler into the bumper so i dont scrape it all the time on driveways Nice, hopefully its not tucked to the point where the bumper will melt right? lol I tucked mine and it melted my bumper so I cut a hole and now I have to get a pipe welded on to extend it past the bumper.
|
|
|
Post by Hemifan87 on Jan 20, 2013 23:34:26 GMT -5
Also as you may know I swapped my 240sx rims back on the versa because me and my family drove it up to nh to visit family. Something funny happened on the trip you may remember that it's had a check engine light on ever since it was flooded and I have been trying to fix it well about the time we got to new york it turned off!!! All on its own I'm so happy it is off the car must have just needed to go on a long drive oh and it did great on the trip a little low on mpgs (32) but oh well.
|
|
|
Post by BluV3R18 on Jan 20, 2013 23:45:04 GMT -5
new york would be a really long drive from me. I'm planning to go to Tampa, FL but not any time soon. Good thing the Check Engine light went away.
today i didn't do anything, just drove her to the store to get something, then back to the drive way she went.
|
|
|
Post by str8spaceball on Jan 21, 2013 0:21:25 GMT -5
|
|
|
Post by crownabove on Jan 21, 2013 1:58:32 GMT -5
the weapon-R got a pretty bad rating when Dsport magazine did their SRI intake shoot out on a cube(MR18 motor),, it comes with a tube that you run down to your lower grill area to bring in cold air,, I have the Tekeda SRI,,it has been great and I would recommend that one, I gives you a pretty good mid range boost,,it is a little loud though,,but I kinda like it,,just my 2 cents
|
|
|
Post by Major Versa on Jan 21, 2013 11:52:55 GMT -5
all hatches are the same so it will fit. i personally would go with another brand. weapon r showed the worse results on a dyno when ran on the cube which is the same as the versa.
|
|
|
Post by Major Versa on Jan 21, 2013 16:06:25 GMT -5
Before After
|
|
|
Post by crownabove on Jan 21, 2013 17:48:38 GMT -5
yeah I like the center part of your bumper blue,are you going to keep lhe lower part black also,,I took mine off for a while but I think it looks alot better with it so I re wrapped it yesterday,,,your hood looks great,,I want one but it is getting further down my list of future mods
|
|
|
Post by Major Versa on Jan 21, 2013 19:59:15 GMT -5
thanks, im keeping blue. getting bored with flat black and i reallly want a nice clean lookin car. will look better once i get it lower and new wider wheels with a deeper offset.
|
|
|
Post by str8spaceball on Jan 21, 2013 20:23:26 GMT -5
thanks guys, suppose i can get the takeda from versaspeed. usually people say that's a good site to order from.
|
|
|
Post by Major Versa on Jan 21, 2013 20:29:39 GMT -5
versaspeed or micro image are the 2 best
|
|
|
Post by Major Versa on Jan 22, 2013 23:27:35 GMT -5
classy new doors, ill have to snap a pic of the doors open along with the shift boot
|
|
|
Post by BluV3R18 on Jan 23, 2013 0:20:04 GMT -5
Major Versa looks nice, keep up the good work!! to mine, I only filled her up with gas =D
|
|
|
Post by athikerguy4life on Jan 23, 2013 11:39:18 GMT -5
Walked out to the garage with the intention of disassembling my 300zx calipers to start rebuilding them....
Turned around and walked back inside. Its freakin cold out today. its only 1 degree right now and we dont have a heated garage!
|
|